Update minetest.conf.example and dummy translation file

minetest.conf.example

@@ -30,7 +30,7 @@
 #    type: bool
 # pitch_move = false
 
-#    Fast movement (via the "special" key).
+#    Fast movement (via the "Aux1" key).
 #    This requires the "fast" privilege on the server.
 #    type: bool
 # fast_move = false
@@ -61,7 +61,7 @@
 #    type: float
 # mouse_sensitivity = 0.2
 
-#    If enabled, "special" key instead of "sneak" key is used for climbing down and
+#    If enabled, "Aux1" key instead of "Sneak" key is used for climbing down and
 #    descending.
 #    type: bool
 # aux1_descends = false
@@ -70,7 +70,7 @@
 #    type: bool
 # doubletap_jump = false
 
-#    If disabled, "special" key is used to fly fast if both fly and fast mode are
+#    If disabled, "Aux1" key is used to fly fast if both fly and fast mode are
 #    enabled.
 #    type: bool
 # always_fly_fast = true
@@ -107,10 +107,10 @@
 #    type: bool
 # fixed_virtual_joystick = false
 
-#    (Android) Use virtual joystick to trigger "aux" button.
-#    If enabled, virtual joystick will also tap "aux" button when out of main circle.
+#    (Android) Use virtual joystick to trigger "Aux1" button.
+#    If enabled, virtual joystick will also tap "Aux1" button when out of main circle.
 #    type: bool
-# virtual_joystick_triggers_aux = false
+# virtual_joystick_triggers_aux1 = false
 
 #    Enable joysticks
 #    type: bool
@@ -188,7 +188,7 @@
 #    Key for moving fast in fast mode.
 #    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
 #    type: key
-# keymap_special1 = KEY_KEY_E
+# keymap_aux1 = KEY_KEY_E
 
 #    Key for opening the chat window.
 #    See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
@@ -570,9 +570,9 @@
 # trilinear_filter = false
 
 #    Filtered textures can blend RGB values with fully-transparent neighbors,
-#    which PNG optimizers usually discard, sometimes resulting in a dark or
-#    light edge to transparent textures. Apply this filter to clean that up
-#    at texture load time.
+#    which PNG optimizers usually discard, often resulting in dark or
+#    light edges to transparent textures. Apply a filter to clean that up
+#    at texture load time. This is automatically enabled if mipmapping is enabled.
 #    type: bool
 # texture_clean_transparent = false
 
@@ -580,9 +580,8 @@
 #    can be blurred, so automatically upscale them with nearest-neighbor
 #    interpolation to preserve crisp pixels. This sets the minimum texture size
 #    for the upscaled textures; higher values look sharper, but require more
-#    memory.  Powers of 2 are recommended. Setting this higher than 1 may not
-#    have a visible effect unless bilinear/trilinear/anisotropic filtering is
-#    enabled.
+#    memory.  Powers of 2 are recommended. This setting is ONLY applies if
+#    bilinear/trilinear/anisotropic filtering is enabled.
 #    This is also used as the base node texture size for world-aligned
 #    texture autoscaling.
 #    type: int
@@ -662,6 +661,68 @@
 #    type: bool
 # enable_waving_plants = false
 
+#### Dynamic shadows
+
+#    Set to true to enable Shadow Mapping.
+#    Requires shaders to be enabled.
+#    type: bool
+# enable_dynamic_shadows = false
+
+#    Set the shadow strength.
+#    Lower value means lighter shadows, higher value means darker shadows.
+#    type: float min: 0.05 max: 1
+# shadow_strength = 0.2
+
+#    Maximum distance to render shadows.
+#    type: float min: 10 max: 1000
+# shadow_map_max_distance = 120.0
+
+#    Texture size to render the shadow map on.
+#    This must be a power of two.
+#    Bigger numbers create better shadowsbut it is also more expensive.
+#    type: int min: 128 max: 8192
+# shadow_map_texture_size = 1024
+
+#    Sets shadow texture quality to 32 bits.
+#    On false, 16 bits texture will be used.
+#    This can cause much more artifacts in the shadow.
+#    type: bool
+# shadow_map_texture_32bit = true
+
+#    Enable poisson disk filtering.
+#    On true uses poisson disk to make "soft shadows". Otherwise uses PCF filtering.
+#    type: bool
+# shadow_poisson_filter = true
+
+#    Define shadow filtering quality
+#    This simulates the soft shadows effect by applying a PCF or poisson disk
+#    but also uses more resources.
+#    type: enum values: 0, 1, 2
+# shadow_filters = 1
+
+#    Enable colored shadows. 
+#    On true translucent nodes cast colored shadows. This is expensive.
+#    type: bool
+# shadow_map_color = false
+
+#    Set the shadow update time.
+#    Lower value means shadows and map updates faster, but it consume more resources.
+#    Minimun value 0.001 seconds max value 0.2 seconds
+#    type: float min: 0.001 max: 0.2
+# shadow_update_time = 0.2
+
+#    Set the soft shadow radius size.
+#    Lower values mean sharper shadows bigger values softer.
+#    Minimun value 1.0 and max value 10.0
+#    type: float min: 1 max: 10
+# shadow_soft_radius = 1.0
+
+#    Set the tilt of Sun/Moon orbit in degrees
+#    Value of 0 means no tilt / vertical orbit.
+#    Minimun value 0.0 and max value 60.0
+#    type: float min: 0 max: 60
+# shadow_sky_body_orbit_tilt = 0.0
+
 ### Advanced
 
 #    Arm inertia, gives a more realistic movement of
@@ -694,11 +755,11 @@
 #    type: float min: 0 max: 0.25
 # near_plane = 0.1
 
-#    Width component of the initial window size.
+#    Width component of the initial window size. Ignored in fullscreen mode.
 #    type: int min: 1
 # screen_w = 1024
 
-#    Height component of the initial window size.
+#    Height component of the initial window size. Ignored in fullscreen mode.
 #    type: int min: 1
 # screen_h = 600
 
@@ -710,10 +771,6 @@
 #    type: bool
 # fullscreen = false
 
-#    Bits per pixel (aka color depth) in fullscreen mode.
-#    type: int
-# fullscreen_bpp = 24
-
 #    Vertical screen synchronization.
 #    type: bool
 # vsync = false
@@ -1011,7 +1068,7 @@
 # font_path_italic = fonts/Arimo-Italic.ttf
 
 #    type: filepath
-# font_path_bolditalic = fonts/Arimo-BoldItalic.ttf
+# font_path_bold_italic = fonts/Arimo-BoldItalic.ttf
 
 #    Font size of the monospace font in point (pt).
 #    type: int min: 1
@@ -1031,19 +1088,7 @@
 # mono_font_path_italic = fonts/Cousine-Italic.ttf
 
 #    type: filepath
-# mono_font_path_bolditalic = fonts/Cousine-BoldItalic.ttf
-
-#    Font size of the fallback font in point (pt).
-#    type: int min: 1
-# fallback_font_size = 15
-
-#    Shadow offset (in pixels) of the fallback font. If 0, then shadow will not be drawn.
-#    type: int
-# fallback_font_shadow = 1
-
-#    Opaqueness (alpha) of the shadow behind the fallback font, between 0 and 255.
-#    type: int min: 0 max: 255
-# fallback_font_shadow_alpha = 128
+# mono_font_path_bold_italic = fonts/Cousine-BoldItalic.ttf
 
 #    Path of the fallback font.
 #    If “freetype” setting is enabled: Must be a TrueType font.
@@ -1364,6 +1409,11 @@
 #    type: string
 # chat_message_format = <@name> @message
 
+#    If the execution of a chat command takes longer than this specified time in
+#    seconds, add the time information to the chat command message
+#    type: float
+# chatcommand_msg_time_threshold = 0.1
+
 #    A message to be displayed to all clients when the server shuts down.
 #    type: string
 # kick_msg_shutdown = Server shutting down.
@@ -1682,7 +1732,7 @@
 
 #    Set the language. Leave empty to use the system language.
 #    A restart is required after changing this.
-#    type: enum values: , ar, ca, cs, da, de, dv, el, en, eo, es, et, eu, fil, fr, hu, id, it, ja, ja_KS, jbo, kk, kn, lo, lt, ms, my, nb, nl, nn, pl, pt, pt_BR, ro, ru, sl, sr_Cyrl, sv, sw, th, tr, uk, vi
+#    type: enum values: , be, bg, ca, cs, da, de, el, en, eo, es, et, eu, fi, fr, gd, gl, hu, id, it, ja, jbo, kk, ko, lt, lv, ms, nb, nl, nn, pl, pt, pt_BR, ro, ru, sk, sl, sr_Cyrl, sr_Latn, sv, sw, tr, uk, vi, zh_CN, zh_TW
 # language =
 
 #    Level of logging to be written to debug.txt:
@@ -1714,10 +1764,9 @@
 
 ## Advanced
 
-#    Default timeout for cURL, stated in milliseconds.
-#    Only has an effect if compiled with cURL.
+#    Maximum time an interactive request (e.g. server list fetch) may take, stated in milliseconds.
 #    type: int
-# curl_timeout = 5000
+# curl_timeout = 20000
 
 #    Limits number of parallel HTTP requests. Affects:
 #    -    Media fetch if server uses remote_media setting.
@@ -1727,14 +1776,10 @@
 #    type: int
 # curl_parallel_limit = 8
 
-#    Maximum time in ms a file download (e.g. a mod download) may take.
+#    Maximum time a file download (e.g. a mod download) may take, stated in milliseconds.
 #    type: int
 # curl_file_download_timeout = 300000
 
-#    Makes DirectX work with LuaJIT. Disable if it causes troubles.
-#    type: bool
-# high_precision_fpu = true
-
 #    Replaces the default main menu with a custom one.
 #    type: string
 # main_menu_script =