To prepare for a smooth merge in the runner codebase.
- run with --fix for gofumpt and golangci
- manual edits for
- disabling useless package naming warning
- rename variables that had underscore in their name
- remove trailing else at the end of a few functions
Reviewed-on: https://code.forgejo.org/forgejo/act/pulls/206
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Co-authored-by: Earl Warren <contact@earl-warren.org>
Co-committed-by: Earl Warren <contact@earl-warren.org>
- rc.getToolCache(ctx) is used to figure out RUNNER_TOOL_CACHE and returns RUNNER_TOOL_CACHE if it is found in the runner config, e.g.
```yaml
container:
env:
RUNNER_TOOL_CACHE: /srv/toolcache
```
- store the value in the new `toolCache` data member for containers, in the same way it is done for host
- GetRunnerContext for containers return `toolCache` instead of a hard coded string
- add integration test
Closesforgejo/runner#184
Reviewed-on: https://code.forgejo.org/forgejo/act/pulls/178
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Co-authored-by: Earl Warren <contact@earl-warren.org>
Co-committed-by: Earl Warren <contact@earl-warren.org>
https://github.com/nektos/act/pull/2372
+ fix: make node tool non volatile
Currently downgrading node via setup-node can break later actions
+ fix it and lookup on startup
+ fix problems
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
Reviewed-on: https://code.forgejo.org/forgejo/act/pulls/168
Reviewed-by: earl-warren <earl-warren@noreply.code.forgejo.org>
Co-authored-by: Andrii Chyrva <andrii.s.chyrva@hotmail.com>
Co-committed-by: Andrii Chyrva <andrii.s.chyrva@hotmail.com>
Currently the only way to get pre and post actions is to go through the nodejs mechanism, which is quite wasteful when all one wants to do is run a couple of shell commands, I'm trying to get around this with this patch.
It works similar to the node* actions in that it supports `pre`, `main` and `post`.
It is different in that these strings are passed to the system shell using `sh -c` and execute similar to the composite run action with the shell set to `sh`.
Example action to make use of this patch: https://codeberg.org/slatian/test-action/src/branch/main/action.yaml
Reviewed-on: https://code.forgejo.org/forgejo/act/pulls/141
Reviewed-by: earl-warren <earl-warren@noreply.code.forgejo.org>
Co-authored-by: Slatian <baschdel@disroot.org>
Co-committed-by: Slatian <baschdel@disroot.org>
- upgrade to golangci-lint@v1.62.2
- make it renovate friendly
- remove most frequent lint check that are not of consequence (unused
args, etc.)
- fix remaining lint errors
- add renovate custom manager to update the Makefile variable
At present, the runner can't run go actions even if the go environment has been set by the `setup-go` action. The reason is that `setup-go` will add the go related paths to [`GITHUB_PATH`](https://docs.github.com/en/actions/using-workflows/workflow-commands-for-github-actions#adding-a-system-path) but in #22 I forgot to apply them before running go actions. After adding the `ApplyExtraPath` function, the `setup-go` action runs properly.
Reviewed-on: https://gitea.com/gitea/act/pulls/26
Reviewed-by: Jason Song <i@wolfogre.com>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
Close#21
I have tested this PR and run Go actions successfully on:
- Windows host
- Docker on Windows
- Linux host
- Docker on Linux
Before running Go actions, we need to make sure that Go has been installed on the host or the Docker image.
Reviewed-on: https://gitea.com/gitea/act/pulls/22
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* fix: GITHUB_ENV / PATH handling
* apply workaround
* add ctx to ApplyExtraPath
* fix: Do not leak step env in composite
See https://github.com/nektos/act/pull/1585 for a test
* add more tests
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
- Join relative path and split dockerfile off to get context
Signed-off-by: Aidan Jensen <aidan@artificial.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* test: add test case for #1319
* fix: setup of composite inputs
This change fixes the composite action setup handling of inputs.
All inputs are taken from the env now. The env is composed of
the 'level above'.
For example:
- step env -> taken from run context
- action env -> taken from step env
- composite env -> taken from action env
Before this change the env setup for steps, actions and composite
run contexts was harder to understand as all parts looked into
one of these: parent run context, step, action, composite run context.
Now the 'data flow' is from higher levels to lower levels which should
make it more clean.
Fixes#1319
* test: add simple remote composite action test
Since we don't have a remote composite test at all
before this, we need at least the simplest case.
This does not check every feature, but ensures basic
availability of remote composite actions.
* refactor: move ActionRef and ActionRepository
Moving ActionRef and ActionRepository from RunContext into the
step, allows us to remove the - more or less - ugly copy operations
from the RunContext.
This is more clean, as each step does hold the data required anyway
and the RunContext shouldn't know about the action details.
* refactor: remove unused properties
* feat: use logger from context wherever possible
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add step/job id and results to json logs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* test: value to be masked should not be hard-coded in the action
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* fix: replace values following ::add-mask:: in evaluated strings
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: [DEBUG] identifier for debug logs to distinguish them
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: replace logger with step logger
The container gets injected a job logger, but during the time that steps
are run, we want to use the step logger.
This commit wraps pre/main/post steps in an executor that replaces the
job logger with a step logger.
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add pre/post stage identifier fields to json log output
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add job/step result status to skipped steps/jobs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: add post step to actions and add state command
This commit includes requried changes for running post steps
for local and remote actions.
This allows general cleanup work to be done after executing
an action.
Communication is allowed between this steps, by using the
action state.
* feat: collect pre and post steps for composite actions
* refactor: move composite action logic into own file
* refactor: restructure composite handling
* feat: run composite post steps during post step lifecycle
* refactor: remove duplicate log output
* feat: run all composite post actions in a step
Since composite actions could have multiple pre/post steps inside,
we need to run all of them in a single top-level pre/post step.
This PR includes a test case for this and the correct order of steps
to be executed.
* refactor: remove unused lines of code
* refactor: simplify test expression
* fix: use composite job logger
* fix: make step output more readable
* fix: enforce running all post executor
To make sure every post executor/step is executed, it is chained
with it's own Finally executor.
* fix: do not run post step if no step result is available
Having no step result means we do not run any step (neither pre
nor main) and we do not need to run post.
* fix: setup defaults
If no pre-if or post-if is given, it should default to 'always()'.
This could be set even if there is no pre or post step.
In fact this is required for composite actions and included post
steps to run.
* fix: output step related if expression
* test: update expectation
* feat: run pre step from actions (#1110)
This PR implements running pre steps for remote actions.
This includes remote actions using inside local composite actions.
* fix: set correct expr default status checks
For post-if conditions the default status check should be
always(), while for all other if expression the default status
check is success()
References:
https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functionshttps://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if
* fix: remove code added during rebase
* refactor: remove composite action runcontext workaround
The RunContext is cloned to execute a composite action with all its
steps in a similar context. This required some workaround, since
the command handler has kept a reference to the original RunContext.
This is solved now, by replacing the docker LogWriter with a proper
scoped LogWriter.
This prepares for a simpler setup of composite actions to be able
to create and re-create the composite RunContext for pre/main/post
action steps.
* test: check env-vars for local js and docker actions
* test: test remote docker and js actions
* fix: merge github context into env when read and setup
* refacotr: simplify composite context setup
* test: use a map matcher to test input setup
* fix: restore composite log output
Since we create a new line writer, we need to log the raw_output as well.
Otherwise no output will be available from the log-writer
* fix: add RunContext JobName to fill GITHUB_JOBNAME
* test: use nektos/act-test-actions
* fix: allow masking values in composite actions
To allow masking of values from composite actions, we need
to use a custom job logger with a reference to the masked
values for the composite run context.
* refactor: keep existing logger for composite actions
To not introduce another new logger while still be able to use
the masking from the composite action, we add the masks to
the go context. To leverage that context, we also add the context
to the log entries where the valueMasker then could get the actual
mask values.
With this way to 'inject' the masked values into the logger, we do
- keep the logger
- keep the coloring
- stay away from inconsistencies due to parallel jobs
* fix: re-add removed color increase
This one should have never removed :-)
* fix: add missing ExtraPath attribute
* fix: merge run context env into composite run context env
This adds a test and fix for the parent environment. It should be
inherited by the composite environment.
* test: add missing test case
* fix: store github token next to secrets
We must not expose the secrets to composite actions, but the
`github.token` is available inside composite actions.
To provide this we store the token in the config and create it in
the GithubContext from there.
The token can be used with `github.token` but is not available as
`secrets.GITHUB_TOKEN`.
This implements the same behavior as on GitHub.
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <markus.noll@new-work.se>
* fixup! fix: allow masking values in composite actions
* style: use tabs instead of spaces to fix linter errors
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <markus.noll@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
