For instance, the volume name derived from the workflow name may exceed the file system limit when the container name it is derived from is too long.
Fixesforgejo/runner#152
Reviewed-on: https://code.forgejo.org/forgejo/act/pulls/191
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Co-authored-by: Earl Warren <contact@earl-warren.org>
Co-committed-by: Earl Warren <contact@earl-warren.org>
This is a followup of https://code.forgejo.org/forgejo/act/pulls/170 so that it is possible to read a workflow without validation. It is not uncommon for Forgejo to read a workflow just to extract a few information from it, knowing it has been validated before. It would be a performance regression if schema validation happened in these cases.
This is a port of https://github.com/nektos/act/pull/2717/files
It is a breaking change in the context of Forgejo and Forgejo runner because it will need to add the new `validate` argument when reading workflows.
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
Reviewed-on: https://code.forgejo.org/forgejo/act/pulls/180
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Co-authored-by: Earl Warren <contact@earl-warren.org>
Co-committed-by: Earl Warren <contact@earl-warren.org>
* fix: use non strict schema to allow some undefined behavior
* GitHub Actions doesn't use the newer strict schema in the service
* Tolerate more hallucinations
* Update workflow.go
* Update workflow.go
* Update pkg/model/workflow.go
Co-authored-by: Josh Soref <2119212+jsoref@users.noreply.github.com>
---------
Co-authored-by: Josh Soref <2119212+jsoref@users.noreply.github.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
(cherry picked from commit b52da6190c971733cdf3ffcef97cdbdce4ba42e5)
- upgrade to golangci-lint@v1.62.2
- make it renovate friendly
- remove most frequent lint check that are not of consequence (unused
args, etc.)
- fix remaining lint errors
- add renovate custom manager to update the Makefile variable
* WorkflowDispatchConfig supports ScalarNode and SequenceNode yaml node kinds
* Avoid using log.Fatal
* package slices is not in golang 1.20
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* throw if `uses` is invalid
* update JobType to return error
* lint
* put //nolint:dupl on wrong test
* update error message to remove end punctuation
* lint
* update remote job type check
* move if statement
* rm nolint:dupl ... we'll see how that goes
---------
Co-authored-by: Casey Lee <cplee@nektos.com>
* Log incoming jobs.
Log the full contents of the job protobuf to make debugging jobs easier
* Ensure that the parallel executor always uses at least one thread.
The caller may mis-calculate the number of CPUs as zero, in which case
ensure that at least one thread is spawned.
* Use runtime.NumCPU for CPU counts.
For hosts without docker, GetHostInfo() returns a blank struct which
has zero CPUs and causes downstream trouble.
---------
Co-authored-by: Paul Armstrong <psa@users.noreply.gitea.com>
Co-authored-by: Jason Song <i@wolfogre.com>
This PR is to support overwriting the default `CMD` command of `services` containers.
This is a Gitea specific feature and GitHub Actions doesn't support this syntax.
Reviewed-on: https://gitea.com/gitea/act/pulls/50
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
Fix https://gitea.com/gitea/act_runner/issues/80
Fix https://gitea.com/gitea/act_runner/issues/85
To support reusable workflows, I made some improvements:
- read `yml` files from both `.gitea/workflows` and `.github/workflows`
- clone repository for local reusable workflows because the runner doesn't have the code in its local directory
- fix the incorrect clone url like `https://https://gitea.com`
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/34
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* fix: map job output for reusable workflows
This fixes the job outputs for reusable workflows. There is
a required indirection. Before this we took the outputs from
all jobs which is not what users express with the workflow
outputs.
* fix: remove double evaluation
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: allow to spawn and run a local reusable workflow
This change contains the ability to parse/plan/run a local
reusable workflow.
There are still numerous things missing:
- inputs
- secrets
- outputs
* feat: add workflow_call inputs
* test: improve inputs test
* feat: add input defaults
* feat: allow expressions in inputs
* feat: use context specific expression evaluator
* refactor: prepare for better re-usability
* feat: add secrets for reusable workflows
* test: use secrets during test run
* feat: handle reusable workflow outputs
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
This change does parse the different types of workflow jobs.
It is not much by itself but the start to implement reusable
workflows.
Relates to #826
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* test: check workflow_dispatch inputs
This implements a test to check for `workflow_dispatch` inputs.
This will be a prerequisite for implementing the inputs.
* feat: map workflow_dispatch input to expression evaluator
This changes adds the workflow_dispatch event inputs
to the `inputs` context and maintaining the boolean type
* fix: coerce boolean input types
* fix: use step env if available, rc env otherwise
* test: add test case for #1319
* fix: setup of composite inputs
This change fixes the composite action setup handling of inputs.
All inputs are taken from the env now. The env is composed of
the 'level above'.
For example:
- step env -> taken from run context
- action env -> taken from step env
- composite env -> taken from action env
Before this change the env setup for steps, actions and composite
run contexts was harder to understand as all parts looked into
one of these: parent run context, step, action, composite run context.
Now the 'data flow' is from higher levels to lower levels which should
make it more clean.
Fixes#1319
* test: add simple remote composite action test
Since we don't have a remote composite test at all
before this, we need at least the simplest case.
This does not check every feature, but ensures basic
availability of remote composite actions.
* refactor: move ActionRef and ActionRepository
Moving ActionRef and ActionRepository from RunContext into the
step, allows us to remove the - more or less - ugly copy operations
from the RunContext.
This is more clean, as each step does hold the data required anyway
and the RunContext shouldn't know about the action details.
* refactor: remove unused properties
This change stops act from rejecting valid entries such as
```
timeout-minutes: ${{ matrix.runtime == 'v8' && 30 || 15 }}
```
at the job level.
This change complements the fix that was already in place
for the Step struct, done in #1217. See:
e35ab25fed
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
If a step does not have either a `run` or `uses` directive it is
considered invalid.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Feature: uses in composite
* Negate logic
* Reduce complexity
* Update step_context.go
* Update step_context.go
* Update step_context.go
* Fix syntax error in test
* Bump
* Disable usage of actions/setup-node@v2
* Bump
* Fix step id collision
* Fix output command workaround
* Make secrets context inaccessible in composite
* Fix order after adding a workaround (needs tests)
Fixes https://github.com/nektos/act/pull/793#issuecomment-922329838
* Evaluate env before passing one step deeper
If env would contain any inputs, steps ctx or secrets there was undefined behaviour
* [no ci] prepare secret test
* Initial test pass inputs as env
* Fix syntax error
* extend test also for direct invoke
* Fix passing provided env as composite output
* Fix syntax error
* toUpper 'no such secret', act has a bug
* fix indent
* Fix env outputs in composite
* Test env outputs of composite
* Fix inputs not defined in docker actions
* Fix interpolate args input of docker actions
* Fix lint
* AllowCompositeIf now defaults to true
see https://github.com/actions/runner/releases/tag/v2.284.0
* Fix lint
* Fix env of docker action.yml
* Test calling a local docker action from composite
With input context hirachy
* local-action-dockerfile Test pass on action/runner
It seems action/runner ignores overrides of args,
if the target docker action has the args property set.
* Fix exec permissions of docker-local-noargs
* Revert getStepsContext change
* fix: handle composite action on error and continue
This change is a follow up of https://github.com/nektos/act/pull/840
and integrates with https://github.com/nektos/act/pull/793
There are two things included here:
- The default value for a step.if in an action need to be 'success()'
- We need to hand the error from a composite action back to the
calling executor
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
* Patch inputs can be bool, float64 and string
for workflow_call
Also inputs is now always defined, but may be null
* Simplify cherry-picked commit
* Minor style adjustments
* Remove chmod +x from tests
now fails on windows like before
* Fix GITHUB_ACTION_PATH some action env vars
Fixes GITHUB_ACTION_REPOSITORY, GITHUB_ACTION_REF.
* Add comment to CompositeRestrictions
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Ryan <me@hackerc.at>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix: continue jobs + steps after failure
To allow proper if expression handling on jobs and steps (like always,
success, failure, ...) we need to continue running all executors in
the prepared chain.
To keep the error handling intact we add an occurred error to the
go context and handle it later in the pipeline/chain.
Also we add the job result to the needs context to give expressions
access to it.
The needs object, failure and success functions are split between
run context (on jobs) and step context.
Closes#442
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* style: correct linter warnings
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* fix: job if value defaults to success()
As described in the documentation, a default value of "success()" is
applied when no "if" value is present on the job.
https://docs.github.com/en/actions/learn-github-actions/expressions#job-status-check-functions
Co-authored-by: Markus Wolf <mail@markus-wolf.de>
* fix: check job needs recursively
Ensure job result includes results of previous jobs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* test: add runner test for job status check functions
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* test: add unit tests for run context if evaluation
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* refactor: move if expression evaluation
Move if expression evaluation into own function (step context) to
better support unit testing.
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* test: add unit tests for step context if evaluation
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* fix: handle job error more resilient
The job error is not stored in a context map instead of a context
added value.
Since context values are immutable an added value requires to keep
the new context in all cases. This is fragile since it might slip
unnoticed to other parts of the code.
Storing the error of a job in the context map will make it more stable,
since the map is always there and the context of the pipeline is stable
for the whole run.
* feat: steps should use a default if expression of success()
* test: add integration test for if-expressions
* chore: disable editorconfig-checker for yaml multiline string
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
